Radial SW4, 4-ch balanced stereo AB input switcher with summed outputs and PFL
Radial Engineering SW4 4-ch balanced stereo AB input switcher with summed outputs and PFL
We sell the full line of Radial Engineering products and accessories. Not all products are on the website but are available to order. Please contact our showroom for pricing and to order other products not listed 1-800-662-1312.
Four Channel Audio Switcher
The Radial SW4 is a four channel balanced audio switcher designed to connect to multiple mixing consoles or wireless systems providing greater operational flexibility or backup capabilities in a live performance or concert setting.
- Switch up to 4 sets of wireless systems
- Link channels for stereo or quad switching
- Toggle between two consoles at festivals
- Transformer isolated to eliminate noise
Silent console switching
The SW4 allows you to connect two mixing consoles to the same set of outputs perfect for festivals or venues that switch from one console to another between acts. Each of the four channels features XLR inputs and transformer-isolated outputs to eliminate hum and buzz from ground loops and they can be linked together to switch simultaneously. Channel-1 has a A+B mix function that sums both inputs together - allowing a wireless mic for the MC to be always active while PFL switches and headphone outputs allow a technician to monitor any channel to ensure seamless playback. Since individual channels can be switched on their own the SW4 can also be used to switch multiple wireless systems playback devices or any balanced audio sources.
Specifications | ||
---|---|---|
Audio circuit type: | Passive Transformer Coupled with Relay Switching | |
Transformer: | Eclipse ET-LD2 line output | |
Number of channels: | 4 x AB select | |
Frequency response: | 10Hz to 40Khz | |
Dynamic range: | 136dB | |
Gain: | -0.26dB with 10k Ohm load -2.3dB with 600 Ohm load (Channel to Channel gain) + 8dB with 10k Ohm load (Channel to Bus gain) | |
Total harmonic distortion: | 0.002% | |
Intermodulation Distortion: | 0.01% | |
Phase Deviation: | <3° at all frequencies | |
Input Impedance: | Load impedance in parallel with 10K | |
Output Impedance: | 160 Ohms (Channel) 500 Ohms (Bus) | |
Maximum Input: | +26dBu (Channel to Channel) +17dBu (Channel to Bus) | |
Features | ||
Input pad Ground lift | ||
Input Connectors: | XLR female | |
Output Connectors: | XLR male ¼" guitar | |
Extras: | Bus output: stereo or mono assignable | |
General | ||
Construction: | 14 gauge steel chassis & outer shell | |
Size (L x W x D): | 17.5" x 6" x 1.75" (445mm x 152.5mm x 44.5mm) | |
Shipping size (L x W x D): | 22" x 10.375" x 4.5" (559mm x 264mm x 114mm) | |
Power: | External 100V - 240V AC with 48V Phantom | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year transferable |
Model: | R800 8110 |
Manufacturer: | Radial Engineering, LTD. |