Your shopping cart is currently empty.
Radial ProMS2, Mic splitter, passive, 1 input, 2 direct outs & 1 Eclipse isolated output
SKU:
ae00-207366
Manufacturer Part #:
R800 1122
Features
Radial Engineering ProMS2 Mic splitter passive with 1-input 2-direct outs & 1 Eclipse isolated output
We sell the full line of Radial Engineering products and accessories. Not all products are on the website but are available to order. Please contact our showroom for pricing and to order other products not listed 1-800-662-1312.
Passive 2-way Microphone Splitter
The ProMS2™ is a balanced mic-level splitter designed to send a signal to multiple destinations simultaneously on stage with one transformer-isolated output and two direct outputs.
- Send one microphone signal to three destinations simultaneously
- Eclipse transformer for clean & transparent audio
- Eliminates hum and buzz caused by ground loops
- Single isolated output provides optimal noise rejection
Portable mic splitting for stage use
The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops while delivering a wide frequency response and low distortion. Ground lifts on the outputs help further reduce noise while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes with up to eight fitting in the Radial J-Rak.
| Specifications | ||
|---|---|---|
| Audio circuit type: | Passive | |
| Transformer: | Eclipse ET-MS10 | |
| Frequency response: | 20Hz ~ 20KHz (+0dB -1dB) | |
| Dynamic range: | >140dB | |
| Gain: | -0.5dB | |
| Total harmonic distortion: | 0.001% | |
| Intermodulation Distortion: | 0.003% | |
| Phase Deviation: | 1° @ 20Hz | |
| Input Impedance: | 2.5K Ohms unbalanced | |
| Output Impedance: | 140K Ohms balanced | |
| Common Mode Rejection Ratio: | -115dB at 60Hz | |
| Noise: | -140dB | |
| Maximum Input: | +26dBu | |
| Features | ||
| Input pad | ||
| Input Connectors: | XLR-F | |
| Output Connectors: | XLR-M | |
| General | ||
| Construction: | 14-gauge steel chassis & outer shell | |
| Size (L x W x D): | 5.0" x x | |
| Weight: | 1.55lb (0.7kg) | |
| Shipping weight: | 1.92lb (0.87kg) | |
| Power: | Passive no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year transferable | |
| Model: | R800 1122 |
| Manufacturer: | Radial Engineering, LTD. |
*
Call 800.662.1312 to Order
Customer Reviews
