Menu

Radial Engineering JS3 Mic splitter, passive with 1-input, 1-direct out & 2 Jensen isolated outputs

Radial Engineering JS3 Mic splitter, passive with 1-input, 1-direct out & 2 Jensen isolated outputs

Item Number : Radial Engineering

MODEL:RAD JS3

Radial Engineering JS3 Mic splitter, passive with 1-input, 1-direct out & 2 Jensen isolated outputs

Radial Engineering JS3 Mic splitter, passive with 1-input, 1-direct out & 2 Jensen isolated outputs

We sell the full line of Radial Engineering products and accessories. Not all products are on the website but are available to order. Please contact our showroom for pricing and to order other products not listed, 1-800-662-1312.

Passive 3-way Microphone Splitter

The JS3™ is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with two transformer-isolated outputs and one direct output.

  • Send one microphone signal to three destinations simultaneously
  • Jensen transformer-equipped for exceptional audio quality
  • Eliminates hum and buzz caused by ground loops
  • Dual isolated outputs provide optimal noise rejection

Portable mic splitting on stage or in the studio

The JS3 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.

The Radial JS3 mic splitter is a passive device that employs a Jensen transformer to perform the mic bridging and as such, all technical specifications show the isolated output. It is important to note that the JS3 has been optimized for use at mic levels and each device is supplemented with MuMETAL® shielding and a solid steel enclosure to ensure minimal pollution from outside magnetic interference.

Specifications
Audio circuit type: Passive mic/line splitter, transformer based
Transformer: JT-MB-DPC, 1:1:1 ratio
Number of channels: Three-way splitter (one in/three out)
Frequency response: 20Hz ~ 20KHz (+0dB/ -2dB)
Dynamic range: 140dB
Total harmonic distortion: 0.0005% @ 1kHz
Phase Deviation: 0.7° @ 100Hz; 2.8° @ 20Hz
Input Impedance: 2.4k Ohms, unbalanced
Output Impedance: 2.4k Ohms, unbalanced
Maximum Input: +25dBu @ 1kHz
Features
Input pad, Ground lift
Input Connectors: XLR-F in
Output Connectors: Two isolated outputs
General
Construction: 14-gauge steel chassis & outer shell
Size (L x W x D): 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.55lb (0.7kg)
Shipping size (L x W x D): 4" x 3" x 6.5" (102 x 76 x 165mm)
Shipping weight: 1.92lb (0.87kg)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable

Write Your Own Review

You're reviewing: Radial Engineering JS3 Mic splitter, passive with 1-input, 1-direct out & 2 Jensen isolated outputs

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value

Use spaces to separate tags. Use single quotes (') for phrases.

Related Products